Brute air compressors are supplied by Briggs & Stratton and were sold throughout North America by, among others, WalMart big box stores. Some folks have written that they were available from NAPA stores too.
I did an extensive search to see if I could find a source for these air compressors today, with no luck. There are some sources of parts and some sites relating to the Brute air compressor, but they no longer appear to be sold new.
A visit to the Briggs & Stratton website shows other outdoor power equipment being available under the Brute brand, but no sign of Brute air compressors. They do, however, show that they sold air compressors on the support portal at this site: www.briggsandstratton.com/us/en/support
Brute Air Compressor
I wouldn’t hesitate to contact Briggs & Stratton directly to see if they could direct me to or help with a problem I was having with a Brute air compressor.
For phone Support: contact them at 1-800-444-7774, Monday-Friday 8:00 a.m. – 5:00 p.m. CST.
Need Brute Air Compressor Manuals?
Visit www.briggsandstratton.com/us/en/support/manuals/air-compressor and, with the complete model number of your Brute air compressor, you can download the manual for it.
If you are a user of the Brute air compressor line and you have problems with your compressor and Briggs and Stratton cannot help, use this forum to ask a question or add advice.
As a Brute air compressor owner or user, if you have resolved any of the issues posted, a comment about how you did that would be very much appreciated by all.
Thanks for your questions and to those that have taken a bit of their time to share their experiences and information about the Brute line of air compressors.
Bill
Existing Brute air compressors questions:
Brute air compressor oil
The manual doesn’t say what weight or type of oil to fill it with
Brute replacement valves
Where can I get both replacement reed valves shown in the
… The CH head gasket *may* differ from your Brute, and may be the same as the one on my Alltrade Trades Pro compressor. Mine is more like a silicon weird-shaped O-ring affair. If you want to stick with that, the model # of my Trades Pro compressor is 836563. I just ordered parts from them a couple of weeks ago. alltradetools.com Had I not been able to source the original, I would have no trouble ordering the CH kit I mentioned. I would definitely use some good gasket cement though, as parts of that head gasket are *very* narrow… Read more »
Further to Apexserv’s comment below, I think you will find the Campbell Hausfeld valve kit HL026100AV will work just fine.
Having done some repair work on my Brute compressor the part search led me to find replacement parts listed as Campbell Hausfield. The ebay ad stated “will also fit husky, brute and a few other brands”.