There is line of Champion branded reciprocating air compressors sold in North America by Gardner Denver. These products are sold and serviced throughout North America by authorized distributors.
The head office for the North American brand of Champion air compressors is:
Champion
1800 Gardner Expressway
Quincy, IL 62305
Tel: 866-276-3440
Web: ww.championpneumatic.com
There is a another line of reciprocating and rotary screw compressors of the Champion brand offered by Sullair – Australia. They are manufactured in, and sold by, more than twenty distributors and branch locations throughout Australia to provide sales and after-sales support to customers.
They do state that their rotary screw compressors are made in Australia, but I was not able to definitely determine if their recip compressors were too. I have a sneaking suspicion (I hope I’m wrong) that their recips come from the orient, but I am not sure.
The head office for Australian brand of Champion air compressors is:
Champion Sullair Compressors
Head Office
324-332 Frankston-Dandenong Rd
Dandenong VIC 3175
Tel: 1300 COMPRESSOR (1300 266 773
Web: www.sullair.com.au
Champion air compressors owners and users, if they have been unable to resolve an issue with a Champion compressor from any other source, can post a question about their Champion compressors on this page.
If you are an owner or user of Champion compressors, why not help a mate by responding to a question submitted?
There is a lot of information about cross-brand troubleshooting problems which common to many brands on the troubleshooting page on this site. Your answer may already be there too.
Champion Air Compressor Manuals
Doug SDca sent this in for us:
I do not have any other manuals or info uploaded as yet (since I haven’t had any uploaded using the form at the end of this page by any kind Champion compressor owner) for the Australian Champion products. Their website does not offer a manual download.
Champion – Gardner Denver air compressor manuals can be purchased at www.industrialaircompressors.biz/champion-manuals .
Thanks,
Bill
Existing Champion Air Compressor questions:
Champion centrifugal valve will not close
I’ve posted this on a few forums and so far I haven’t been able to get any help at all. I’m hoping I’ve finally come
R-30D has air coming out of governor housing
We recently rebuilt the top end of the cylinder valves and the compressor was working properly. After a week
Champion R-15 compressor pumping slowly
I have recently mounted a used Champion R15B compressor to an 80 gallon tank.
Champion VR5-8 low oil switch tripping
I recently moved and relocated the compressor. Upon restart , after replacing 2 quarts of correct oil, it ran for about
Old Champion air compressor bleeding out air
Hi Bill, what I mean by air bleeding is that as soon as it hits 150psi and kicks off
New comment? New question? Please add it here along with photos to help others help you with your compressor and equipment problem!
Rebuild kit for this compressor
Looking to identify and purchase parts to refurbish what i believe is a Champion 2 stage compressor. Thank you
Anybody have any info on a model S champion compressor? I cannot seem to find anything on.
I recently purchased a older Champion (Farm Master – model FM 5A) Serial # 190935 – I was wondering how old it was or how to date it. It seems as it has been neglected and I would like to restore it. Any information would be greatly appreciated.
Travis
i have a model 5v any help on finding parts? looking for the ones on the pistons
champion compressor pump serial # R-15A 87K. compressor runs good till it builds pressure and shuts off then the air comes out where i have shown in the picture.. i think it should bleed a small amt of air for restart. but it will bleed off the whole tank. help i am lost. thank you steve.