Saylor-Beall Air Compressors

In what might make them an oddity in the North American compressor supply business, Saylor-Beall air compressors are manufactured in the USA. Saylor Beall manufactures two-stage reciprocating air compressors and also manufacture rotary-screw air compressors right here in North America.

Support is available directly from them and visitors can download the Saylor-Beall air compressors manuals directly from their website. Follow the Documents link on the navigation bar on their site.

Saylor-Beall Manufacturing Company
P.O. Box 40, 400 N. Kibbee Street,
St. Johns, MI 48879

Saylor-Beall air compressors

This page is a forum for all things relating to Saylor-Beall Compressors with issues and comments about Saylor-Beall air compressors posted by folks that use this brand of air compressor, have had problems with them, and some of who have fixed problems with Saylor-Beall air compressors and shared that information for us all.

If you have a question of your own, after you have read the existing postings for the Saylor-Beall air compressor, and read the troubleshooting pages which supply solutions to many common air compressor problems, then please use the form below to start a new thread. Provide as much information about your air compressor condition as you can to make it easier for us and others to help.

If you can help regarding any of the questions below, please add a comment to that question by clicking the comment link to add information to that post.

Manuals for Saylor Beall air compressors can be had right here.

I thank you.


Saylor-Beall Air Compressor Issues

Having an issue with your Saylor-Beall air compressor?

Other visitor's issues with Saylor-Beall Air Compressors

Please see below.

Saylor-Beall 703 blowing oil out of crankcase vent. 
I have a Saylor-Beall 703 that is blowing air and oil out of the crankcase vent when the compressor hits the cut off pressure (I looked at the oil and …

Water in crankcase of 705 pump 
Saylor Beall model 705. this is an older compressor that has worked fine for many years. Now when it runs the crankcase oil gets water in it in just …

Saylor-Beall air compressor is running fast then slow  
compressor is running fast then slow till 60 psi then really slow not gaining any more psi. its an older model 5hp with an 80 horizontal tank. It was …

5hp Saylor Beall motors Safety Switch Trips A Few Seconds After Cut In 
Compressor is a 5hp Saylor Beall 700 series. Apologies for the following being long winded. I purchased this compressor used and worked fine for a few …

Saylor Beall air compressor trips circuit breaker immediately after starting 
I have a really perplexing problem with an older air compressor. The compressor is an old 2-stage Saylor Beall 80 gallon with a 240v 5HP Dayton electric …

have a saylor/beale when turned on all it's does is hum? 
when it's turnd on all it does is hum. ______________________ Bill says.... Billy, when it hums, is it a tune you recognize?? Kidding aside, …

Click here to write your own.