Pully size for Ingersoll Rand T30 compressor

Published Categorized as Air Compressor Parts Required, Ingersoll Rand No Comments on Pully size for Ingersoll Rand T30 compressor

Hey! This site is reader-supported and we earn commissions if you purchase products from retailers after clicking on a link from our site.

by Mark
(Delphos, Ohio)

I bought a T30 compressor and it had an incorrect motor on it. My question is what size motor pulley should be on it?


Pully size for T30
by: Doug in s.d.ca.

What motor are you planning to use? HP, RPM?

Older Ingersoll Rand T-30 air compressor
Older Ingersoll Rand T-30 air compressor


by: Anonymous

5 hp motor 230 volts and 9 inch pulleys, I have one of these that’s why I know. Good luck!


Pulley for T-30 2475
by: Larry

what is the max rpm on the compressor? Right now I have a 3 in pulley on motor and a 13 in come on the compressor.

The motor is a 3520 RPM!

I also have a 2340 t-30 with a 13
in on it and the motor has a 6
in the is also a 3520.

just need to confirm.


2475 pump
by: Doug in s.d.ca.

Min/Max RPM:


I also have a 2340 t-30…
by: Doug in s.d.ca.

Can’t say on this, ’cause it’s an assembled unit with no specific RPM spec that I can find.

It has the same LP head parts, but the HP head is different from the 2475. The 2475 runs with a 5 – 7.5 HP motor.


2475/2340 T30 compressor
by: Larry

Hey I do thank you I believe that’s what I needed


by: Doug in s.d.ca.

happy to have helped.

New comment? New question? Please add it here along with photos to help others help you with your compressor and equipment problem!

Notify of
Inline Feedbacks
View all comments