Does your air compressor have pressure switch issues? Here’s where you can find some help dealing with them.
Many times folks think that their compressor may have a pressure switch problem since air leaks out the pressure switch when the compressor is stopped is common. And that’s the pressure switch, right? Nope. That is not a necessarily a pressure switch issue.
If that is the symptom you are trying to resolve, you likely need to clean or replace the tank check valve. See that linked from the troubleshooting page for more information.
A lot of folks have other compressor pressure switch problems and have sent in questions which I have tried to answer. Please see what others have written about their pressure switch problems and the answers provided as you scroll down this page.
Add your own question if you cannot find an answer in the existing comments,
If you read a question on which you can provide some advice, please add it as a comment. Then all can benefit from your compressor experience.
Thanks very much.
Existing comments about Has Pressure Switch Issues:
I run a mobile service. my compressor holds 120 lbs. when it drops to 90 it kicks back on. I want it to drop to 50
New comment? New question? Please add it here along with photos to help others help you with your compressor and equipment problem!