Find a 5z696a pressure switch

Speedaire 5z696a pressure switch

Speedaire 5z696a pressure switch

where can I find a replacement switch. GRAINGER NO LONGER STOCKS.

Comments for Find a 5z696a pressure switch

Click here to add your own comments

Oct 20, 2014
Speedaire pressure switch
by: Bill

Well friend, here is where a picture or two of your air compressor would sure help.

I went looking for images and found the one shown on this post. I have no idea if this is the setup you have for your Speedaire air compressor, however.

For a 3/4 HP motor, the Square D junction box with the pressure switch on the side sure seems like massive overkill.

In any case, you don't need a Grainger pressure switch.

Find one on line that has the same cut in and cut out, the same voltage (most are 120 or 240) and a similar mounting pattern.

The one in the image is a single port with an adjacent unloader valve port.

If this is yours, there are lots on line. If not, start a new thread and upload four images of the compressor with pressure switch, focusing on the switch sides, and bottom and then I'll recommend a switch to match that.

Bill

Click here to add your own comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Speedaire Compressor Issues.