Compressed Air Dryers

As someone who has helped customers with compressed air problems over many years, I know that there are questions about compressed air dryers, and how to resolve the many water issues created by the compressing of air.

I know how most compressed air dryers work, in principle for some of them, and for others, by having installed an used them. Yet I am not the ultimate authority on compressed air dryers.

IR refrigerant dryer

That's where you come in. :-)

In this forum on compressed air dryers If you would share your experiences with other compressor users, in particular, any issues you have had with dryers, that will sure help other folks.

And, if you are a company that sells and services compressor air dryers, you want to keep an eye on this page for opportunities. Lots of folks are shouting out for help with their water jacket, refrigerant or their dessiccant air dryers, and don't know where to go.

Here is the page where air dryer problems can be posted, perhaps resolved, and where folks in the business can perhaps find a new customer or two.

I will help where I can. I'd appreciate some help from you too.



Compressed Air Dryer Forum

Having an issue with or questions about drying your compressed air? Here is where you can ask a question about it.

Please note that I work on responses to information and technical requests daily so please allow up to 24 hours for a response. Thanks. Bill

Other visitor's issues with compressed Air Dryers

Please see below.

Optimise performance of 5 compressors, dryers receivers 
Hi Bill, How to optimize performance of 5 compressors, 5 dryers and 5 receivers in one plant. My new work place have 5 compressors (range fr 160hp …

Need help related to the air dryer 
At my site has 2 air dryers "heat reactivated blower purge air dryer" operating parallel with: Model: PBZ 4750, Dew-point: -40C, capacity: 4750 SCFM, …

Multiple Heatless Dryers 
I have a customer that has 3 rotary compressor(2 normally run at a time) that are all joined together and run to a wet tank. Then the piping runs to 3 …

Air Dryer port sizing and flow 
I am building a custom air drier. On both ends I have 1/4 npt to thread into. On the side I have 3/8 npt. That said, my port from my air compressor is …

What does it mean when an intercooler pressure is too high and too low? 
Also have you ever seen a graph that represents how an intercooler works relating to moisture, temperature and air capacity

Removing water from air lines outdoors 
We typically work on job sites that can often be cool - ambient temeratures around 30 degrees F are not uncommon - We rent a portable, typcially diesel …

Compressor / dryer arrangement 
Here i have 1 unit of compressor ,air dryer and receiver. Now i need to know how to arrange in sequence in order to run the system perfectly.which unit …

Location of dessicant dryer 
I have a system that already has a refrigerant dryer (expected output 39 deg F Dewpoint Temp). There is a new piece of equipment that requires super …

Click here to write your own.