3Z355G will not start

3Z355G leaking air from regulator knob, needle valve bushing was broken. could not find replacement, so epoxy fix was employed. Re-assembled pressure switch.

Now compressor will not energize. It was running fine before I took it apart, just leaking from the regulator knob, and so could not reach pressure to shut off.

Comments for 3Z355G will not start

Click here to add your own comments

Apr 12, 2017
3Z355G starting
by: Bill

If the 3Z355G tank is empty, and you have power from the power cord to the pressure switch, does the motor side of the switch have power too? It should.

Please advise.

Click here to add your own comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Speedaire Compressor Issues.