Speedaire Air Compressors

compressor wont start under load  7.5 hp 80 gal speedaire
Dayton motor kept blowing breaker - took motor off and was told it was bad and replaced with Baldor motor of same specs
Now when ...

Dayton compressor - does it matter which direction the compressor is rotating  does it matter which direction the compressor is rotating

Dayton compressor
motor rotating counter clockwise

can compressor rotate either direction ...

I have a Speedaire M/N 3Z492 and it vibrates after it gets warmed up  I was performing maintenance on the pump by changing the oil.

The oil was a milky color.

I took the site glass off and put my finger inside the ...

compression failure - Anyone know where to get parts?  I have a speedaire oil-less compressor. mod 5Z032D. 1.5hp, 7.5gal tank (small wheelbarrow style) It is no longer making pressure. My service guys tell ...

venting a Speedaire 1VN93 for exhaust and gasoline fumes  We have a current customer that has requested that we install the 1VN93 in the back of their cargo van. They would like to have us exhaust the unit for ...

Motor lags and blows fuse...  I have a 1 1/2 hp speedaire that won't start before blowing a fuse...The motor has just been rebuilt...From a zero pressure in the tank it starts and ...

Im building a compressor using a Speedaire pump - need manual and flywheel direction please  I need to know what direction the flywheel turn's. I have no modle number but the last three 57c. I allso would like parts manual and know where to get ...

Speedaire dayton 4b227 blowing fuses   Greetings Bill, All,
When the tank is empty turn it on no problems fires up and runs great let the tank get too full and it will trip the breaker, anything ...

Speedaire compressor ? Safe pressure...  I picked up a speedaire Air compressor from a friend of mine and I really don't understand to much about it.

It's model number is 3Z406.

It does ...

specs on a Speedaire 3Z012A? Anyone recognize the model number or have any insight into any hidden meaning in the number?  Grainger doesn't recognize the part number, It is an older pump that looks similar to the 3Z492A pump, but must be significantly smaller as it is running ...

wiring Speedaire 5z185  I just got model 5z185 how do you wire it

_________________
Bill says...

Dennis, that model may be a 3 Phase motor, and if so, you'll need to get ...

Speedaire 5F225 - how to determine a Micro-Farad.   I need a stater capacitor for this unit and I have no old one to reference.

This is a 1 hp 3450 rpm 115/230 volt 17.8/8.0 FLA

I can find some online ...

Any information on a Model 2Z262B Speedaire?  Looking for any information on a Model 2Z262B Speedaire. I know it is OLD, but I can't find any reference to this model anywhere. Any help would be greatly ...

my compressor runs for about 30 seconds then won't turn anymore  A speedaire compressor just came into my life, A friend told me it had something wrong with it but didn't know what when he gave it to me. It's an 80gal ...

Speedaire 4B227 ~ I seem to have a NOISE problem  I have a Speedaire 4B227 which I purchased back in 2007. I have performed all the normal prevenitive measeure on it. Now I seem to have a NOISE problem....

speedaire compressor pump 2z-499 only pumps to 80 psi  i recently acquired a 3z-323 compressor unit which has an apparently new(er) 2z-499 compressor.

other posts on this site call for a 1.5 or 2 hp motor....

I have Dayton Speedaire Model # 3Z180A , 3 HP 80gallon 220 volt - what is it worth?  with the 2 cycle oil .

do know the value withe air flow regulator and hoses and wiring included ? approximently ?? it weighs 450 ilbs excellent condition...

Safety valve discharges air while pumping.  Is this normal,it stops when it shuts off.This is a model 3Z492.

______________________
Bill says...

Allen, no, this is not normal.

You say ...

Reassemble a continuous run unloading valve off a Speedaire  I have an old SpeedAir 2812 single cylender compressor from dayton elect.It has a F.C. Kingman valve i had to take apart to kleen, and now dummy me forgot ...

intake filter for a speedaire 3z199 5 hp single stage compresor  i need 2 air intake filters for a speedaire 3z199 5 hp single stage compresor, can you give me the part #. or tell me where to find them

______________________
...

HELP Speedaire 2z630b - what size of electric motor?  Hey I have a speedaire 2z630b Its on a upright 60 gal tank. With no electric motor I have no idea what motor goes on this. Can some please help me.

Thanks ...

speed-air compressor model 5Z185   What is the max psi and cfm rating on a speed-air model 5Z185 air compressor?

______________________
Bill says...

Hi Allen. Given that there's ...

auto tank drain valve continuously leaking - check valve?  I have a dayton speed air 1WD63 7.5 hp compressor. The compressor will fill properly but when the motor stops then the auto tank drain valve will release ...

speedaire model 3z405 ~ the crankshaft is worn out ~ spare parts needed  I have a 3z405 compressor 3/4 hp motor with 2z498 pump. the crankshaft is worn out on the drive bearing, and i am looking for a new crank shaft.

any ...

Compressor size in CFM for Speedaire compressors  how many cfm is model 32495 speedaire. the model number could also be 3z495 not sure so please sent info for both model numbers. Its 3 horsepower. Thankyou ...

motor over heats  speedaire--mod #3JR76 as the press goes up the comp. becomes harder to turn. at zero press the comp. turns freely @ 30 pounds of press, I can barly turn ...

70 PSI VALVE FLUTTERS WHILE COMPRESSOR IS ON  i HAVE A SPEEDAIRE 3Z182 COMPRESSOR THAT WAS POPPING OFF THE 70 PSI VALVE ON THE SIDE. WE REPLACED IT AND THE SAME THING HAPPENS. IT STILL BUILDS PRESSURE ...

Help, I have a Speedaire Proffessional Compressor model #5F562E  Help, I have a Speedaire Proffessional Compressor model #5F562E hardly used 5 or 6 years old. Blows a breaker everytime after running for aprox. 15 - 20 ...

Speedaire Model #3Z172. What oil?  I have a model number 3Z172. What type of oil is recommended?

Thanks!



Bill says...

Howdy, and thanks for writing in.

You kind find ...

Belt for Speedaire Air Compressor  I have a 30 gallon, horizontal, electric Speedaire compressor. The belt broke. Who is a good source for these? All I know is that the designation on ...

Plugging in a Speedaire compressor: what voltage?  I have an older Speedaire compressor. The model number is 3Z355B (sorry six characters not five as posted). It is a two cylinder, single phase compressor ...

Speedaire Compressor Rebuild  Greetings,

I have a Speed Aire Compressor that I am planning on rebuilding around the first of the year. I am not worried about doing the job but I ...

SPEEDAIRE COMPRESSOR Parts List  I HAVE A SPEEDAIRE COMPRESSOR/3.5HP/1STAGE/MODEL#5Z644A. I CANNOT FIND A PARTS LIST SO I CAN ORDER FROM, CAN YOU HELP ME.

THANK YOU



Bill ...

Speedaire compressor questions  Some questions and answers about Speedaire parts

Speedaire 4.5 gallon compressor keeps tripping...  My Speedaire 4.5 gallon compressor keeps tripping or going out on thermo overloads even unloaded. Trips 20 amp breaker. Any suggestions?

Thanks



Bill ...

I have an old speedaire compressor...  Hello there, i have an old speedaire compressor and i cant get hold of a new belt can u guys help me in any way. I am not in the U.S i'm in the carribean ...

speedair compressor model # 4B236B  I would like an owners manual. Specifically, I need to know what weight oil to use in the compressor.

Thanks



Bill answers...

I suspect ...

Speedaire compressor parts needed  Comments on where to get Speedaire compressor parts

speed aire compressor 32180  i have this compressor but no motor. what kind of motor do i need what size. and it compressor hasnt been used for years. but it works what can i do do ...

What Lube Oil For A Speedaire Compressor 1Z286?  I just got off the phone with Grainger’s and as much as they were helpful, this particular model is just too old for their records (1960 - 1969).

All ...

Speedaire 1Z286, pump X2-22  I wonder where I can find parts for the pump mentioned above X2-22?

What is the most probable cause when the pump start to make "clonking" noise?



Bill ...

speedaire compressor cfm unknown  Is there a way I can roughly calculate the output. It is a reciprocating type V piston arrangement twin cylinder. I can't find the specs for it and ...

Speedaire - 3hp 60 gal model 1Z721 - 3z180 2-stage pump - 5k675 motor at 220v  I bought this unit about 8 years ago for $250 because it had a rod that was egg-shaped at the crankshaft end (probably run low on oil). I rebuilt the ...

Speedaire compressor Model # 4B247B - have to stop useing compressor and wait for air to build up  Compessor only gets up to about 100PSI and is slow getting there and then air presure falls
off fast when air tools are used. have to stop useing compressor ...

Information about a WW294-3  I am looking for parts information about a 80 gal. Speedaire air compressor. The nameplate model number is WW 294-3,WWVR5-8,STR,GR with a SN# D012968. The ...

pump replacement for 5z185  I have an older 5z185 and the pump destroyed itself.

Just wondering if a replacement pump is available and if it is worth
fixing. It is a 60 gal 5hp ...

need to change motor on speedaire 1Z938 - RPM question  1Z938 is Industrial Duty 2-stage 1.5hp 1ph 60gal tank

the factory spec sheet says 680 rpm on compressor
compressor pulley is 12.5"

old motor ...

I need a cap where you put the oil in.  I have Dayton Speedaire Model # 322198. On the compressor the oil cap or screw that you put oil in to is broken. I don't have the part number. Its made ...

3Z413 Speedaire compressor motor sizing, single phase  I bought this compressor that came without a motor, so I have no motor specs, other than it was a 25 HP, 3 phase. My questions are what HP, single phase ...

One cylinder will not pump  it seemes as though that one cylinder is pumping and the other is not and the compresser will not build over 90lbs. of pressure and runs and runs. Is it ...

need a valve repair kit for Speedaire model 1Z722C  Grainger no longer supports this model, looking for a repair kit.

Amy

model 1vn89 pressure switch  I'm trying to rebuild my pressure switch, but the spring popped out ( a new switch is $75). Does anybody have a diagram as to how it attaches?

dayton 3z174b - constant run or start/stop??  is this pump constant run or start/stop??

___________________________
Bill says...

Hi Russell. I found some specs on your pump here:

www.grainger....

low compression  I have a speedaire compressor that runs until it turns off but it only has about 20psi. the pressure is factory preset. what can i do?

_________________________
...

compressor needs work 7.5hp 30 gal.  parts for a model # 5z696a compressor book

____________________
Bill says...

Elroy, I am happy to post this for you asking for information.

What ...

Just purchased a Speedaire Model 9z522 2stage 5 hp need manual & oil type  What type of oil should I use to change in the compressor? It has a 200 psi tank and a 220 5hp 2 stage compressor. Any manuals online for this?
Thanks ...

replace speedaire model 4zl36 filter  how do i change the filter?

_____________________
Bill says...

What filter are you referring to, the air intake filter at the top of the pump, or ...

Portable Speedaire air compressor runs but does not build any pressure at all  I have a New Commercial Portable Speedaire air compressor 120v 1.8H.P. 26 Gallon .. it runs but does not build any pressure at all

________________________
...

parts for Z046A speedaire compressor and manuel  looking for parts Z046A speedaire compressor and manuel
thanks
R.Smith robertpeggysmith@bellsouth.net

___________________________
Bill says...

I ...

drain valve malfunction 1wd74  looks like it stuck open when motor turns off, closes when the motor turns on this creats a cycle that keeps the compressor on allof the time

___________________
...

sputtering Motor  I have a 7.5 HP Sppedaire Model: 5Z639A 1 Phase

It starts fine but after about 10 seconds it begins to sputter

____________________
Bill says...

Hmmm....

Takes a long time to build tank pressure  Is there a refurbishment kit for the filter and inlet valves?

________________________
Bill says...

Ken, you would need to identify the model number ...

speedaire 3Z421 PRV - I need to know the PRV psi  I need to know the PRV psi for my 3z421.
the current on is opening around 135 psi and the motor stops running at 140 psi.

Thanks

______________________
...

Compressor Pressure  I have a speedaire compressor that can switches on when the pressure drops to 40 psi. I have recently changed the equipment the compressor works for where ...

oil level sightglass leaking  Has anyone been able to fix this problem?

Direction of the pump  I bought Speedaire compressor model # 4ME98 with compressor model # DP500002av. I need to know which direction is the pump turns. I am buying a new motor ...

pressure valve in head  every once in a while the 75 psi pressure valve in the head seems to stick and pump simultaneously with the head.valve was changed once and i was wondering ...

Speeaire Model#3Z355 - Broken Belt Guard - Parts needed  The Belt Guard is broken and I need a New one where do I find one and also the price. Model#3Z355 Part #2513A Belt Guard #BG122. Thank you,

______________________
...

speedaire copressor modle 3z395d blows the breaker  Every time I start it and its normal its on auto so it stops after it feels up but when it starts up again it blows the breaker I can't figure out what ...

Need a parts list for a Speedaire Model # 3Z423F compressor  I need to find a parts breakdown/list for an speedaire compressor single stage model # 3Z423F.Thanks, Tom M.

____________________
Bill says...

Tom,...

Tank w/Automatic Drain and Discharge Isolation Valve, for 4XA62  Need replacement parts for auto drain.

E-mail: juan.sola@corelab.com
Phone: 281/478/1341

_____________________
Bill says...

Juan, Grainger ...

Suitability of this Speedaire compressor  I have a NEW Model 52702A twin pump Speedaire compressor with twin Baldor 3HP/3PH motors that I got at a VERY GOOD price.

I know it was for heating ...

air leaks at the reed valve after air pressure is built up in tank located under the air filter on top of the compressor   how do i fix this problem do I need new piston rings and if I do where do I get them My speedaire is modle 1z286e

______________________
Bill says....

Speedaire 5Z405A - relief valve continuously blows and compressor does not reach shut-off pressure.  I have a Speedaire 5Z405A twin cylinder compressor. One of the 75PSI reliefs for one outlet tube continuously relieves air as the compressor tank pressure ...

Compressor won't start when it's hot  I have a Speedaire compressor model # 4B227C that will run fine when it's cold, but once the pump gets hot it trips the breaker. I had the motor checked,...

oil change  what type oil and how much for a speedaire 3Z494 compessor?

____________________
Bill says...

Gary,, is your air compressor is the 3.5 HP / 220 ...

Rod bearings, rings, fan, all needs replacement for 5F562C  I want to rebuild my Speedaire model 5F562C, I cannot find parts, can you help. I need the Rod bearing, fan, rings, gaskets, etc.

______________________
...

need new belt cover 2z499a model #  Need new belt cover. Old plastic one has deteriorated to the point it is coming apart in pieces. Model on compressor is 2z499a early 1980 unit.

Thanks ...

been sitting unused for years  speed air compressor #52168 direct drive 5hp 80gal horizontal tank. sn#0524696-032032 what is needed befor start up?

________________________
Bill ...

Dayton Speedaire Model 3Z419 - what oil and how much?  I'm trying to find the oil capacity and what type of oil to use for this unit.

Thanks.

_________________________
Bill says...

I don't have the ...

unloader valve failure (Nope!)  I'm getting a constant hissing of air at the unloader valve site and the compressor is kicking on due to the air pressure loss. Is that due to failure ...

i have a speedaire 5 hp 2 stage compressor ... It takes longer to fill  It takes longer to fill the tank and air does not stop coming out of the unloader. And I can hear air coming through the intake. Would that be a bad check ...

HAND ME DOWN A SPEEDAIRE! ... might explode on me...?  I just was given a Speedaire 2z498 from my uncle as a gift.. I've looked everywhere for the manual. My question is does this compressor have a cut off ...

Speedairde Motor hums only  I LIVE BY THE OCEAN AND HA VE NOT USED IT FOR A FEW MONTHS THE MOTOR HUMS ANDD EXTENSION CORD. HEATED UP AFTER A BIT SO TURNED IT OFF QUICKLY? ?

_____________________
...

Warranty..try to collect it...had to pay for parts  Has far as we are concerned that is pretty bad customer service...would be nice if someone gave a damn and looked after us .We were told it would take ...

Spare parts needed for Speedaire crankshaft & oil seal for speedaire model 3z419   crankshaft & oilseal for speedaire model# 3z419

pumps heats up excessively causing a rubber burning smell  pupms heats up excessively and causes a burning rubber smell model number 4yn50a(AGM05)

_________________
Bill says...

The pump will normally get ...

speedaire 2z499b wont build any pressure.  The motor runs fine but it won't build any pressure. No funny or unusual noises. There is also a fine film of oil around the pump and on the tank. When ...

Speedaire 1WD63 automatic tank drain  I have a Dayton Speedaire 1WD63 7.5 HP compressor and the automatic tank drain seems to be discharging oily condensation but when I drain it using the ...

I am in Iraq (with a )Speedaire 1WD78 Air Compressor - and need wiring instructions...  I am in Iraq at this time and have been given a Speedaire 1WD78 Air Compressor for my Soldiers to run their numatic tools.

The problem we have is there ...

speed air 4b221  compressor takes about 15 mins to reach 80 psi. when i turn of moter pressure bleeds out the filter.note compressor has set un-used for one year.after ...

speedaire 2Z370  I recently purchased a speedaire 2Z370 diaphram compressor from the second hand store. It appears to be in good shape and (I think) functions properly....

Speedaire Air Compressor Tank Leak  There is an air leak in the compressor where the motor mount is welded to the tank.

We have a frame shop and have all pneumatic tools. It's not ...

belt size for Speedaire compressor  What size belt goes on a 10hp speedaire compressor

____________________
Bill says...

Tough question, since there may be many models of 10 HP Speedaire ...

NEED TO GET PARTS  I AM LOOKING FOR A MANUAL AND PARTS FOR A SPEEDAIRE MODEL:3Z423 B

________________________
Bill says....

If Grainger can't help, can anyone else ...

wiring / manual for a Speedaire compressor  SpeedAire #WW295-2 - 7.5HP 1PH Two-Stage Vertical Electric Air Compressor need wiring diagram?

__________
Bill says...

Assuming that Chuck has checked ...

Speedaire 10.3 cfm @90 psi 60 Gals tank  What the maximum head temperature in operation because the copper pipe ha been heated?

_____________________
Bill says...

Howdy Timmins. I have ...

Leaking air unloader valve  Air won't stop comming out the unloader valve after the unit shuts off.

_____________________
Bill says....

Hey Larry, I wish they were all that ...

my 10 hp speedaire compressor blows fuses  i work in a 22000 sqft building and we have one 10 hp speedaire compressor madle number 1wd74 that runs hot and blows our 30 amp time relay fuses we have ...

Speedaire Compressor will not recharge  Hello,

I have a wheel barrow style Speedaire compressor. It is an oil less unit with a single piston.

The compressor builds up pressure and seemingly ...

Dayton Speedarie - sheave sizing & replacement?  I have a Dayton Speedaire compressor. Has new motor, 2 HP with 3460 RPM shaft dia. is 7/8", pulley looks like about 2".

Need to replace existing ...

Find a speedaire boxed pressure switch, with regulator and 2 guages.  I don't want a different pressure switch. I like to repair the original one. Can you tell, where to buy a new line-mounted pressure switch for, exactlly ...

CFM  MODEL # 12937D OR A 12931D, I CAN'T TELL,(SCRATCHED#)
IT'S A BIG 4 CYL. 2 STAGE 10HP UNIT.
ABOUT HOW MANY CFM DOES THIS THING MAKE?

__________________________
...

Broken valve plate Speedaire 8YJ20A BY DAYTON  This compressor sayd in the tank "Cast iron series" made in USA. My problem is that I have a broken plate that I supose is Call "valve" in some of the ...

When i start my 5F564 compressor it runs until it reaches 175psi and then shuts off.   Is there something that should unload to allow the 12.5 hp gas engine to keep running after a set pressure is reached instead of cutting the engine off?...

SpeedAire Direct Drive 5Z032A 1HP 1 Phase Wiring  Obtained a used SpeedAire Direct Drive Compressor Model 5Z032A, 1 HP. Whoever had it before, disconnected all the 115V AC single Phase wiring. Looked for ...

Switch speedaire from 220 volts back to 110  I have a speedaire 3z323a that came wired for 110 but was switched to 220 by a friend years, ago. Now I want to switch it back. It has a connection box ...

speedaire by dayton runs slow then eventually stops  model # 3z784, 2hp, phase(1)
stage (1)
ROT -- ccw
dayton electric motor -- 9k4578 -- capacitor start duty
2hp 3450rpm
115/230v - 60hz single phase
...

How much compressor oil for the 3JR76 - 2.5 quarts and still pouring  How much oil is needed to be placed in my 3JR76 Model Speedaire compressor. Ive already put 2 and half quarts and see nothing on the watch glass.

______________________
...

auto on/off switch - where and how much?  i have a sppedaire air compressor model #5z032b1 and my auto on/off switch is broken and need one can you tell me where to find one and approximate cost
...

speedaire air compressor starts for 30 seconds and then cuts off  starts for 30 seconds and then cuts off

______________________
Bill says....

Darren, not a lot to go on, here.

While it's running for 30 seconds,...

speedaire compressed air dryer 5Z772 plugged?  This unit is used to dry air on a building thermostate system. It has worked well for about 18 yrs. Now the air from the compressor will not feed through ...

speedie aire dryer freezing up   my dryer is freezing up and not letting air to pass thru it is 70 degrees F here today

_____________________
Bill says...

Hi Jim. It sounds like ...

Portable air tank requirments  When am I required to replace my portable air tank?

_______________
Bill says...

I guess you are "required" to change it when it no longer holds ...

air tank leaks  air tank has pin holes leaks air model 5F237. need new air tank

___________________
Bill says...

Charlie, Grainger might be able to help you with ...

cfm  need to know what cfm my speedaire is, Model #3Z424D1 stageccw

___________________
Bill says...

Mike, the first place to go is Graingers, who own ...

Speedaire model 5z361 tank thickness question  does the tank normally have a crrosion allowance of one-sixth of the calculated thickness, or one-sixteenthinch whichever is smaller,added to the calculated ...

Convert 240VAC motor to 110V on a Speedair Compressor by Dayton  I have a Speedare compressor by Dayton model number 4B234D with motor MC015502. it is wired for 240VAC and i would like it to work on 110VAC. is that ...

what is the max rpm for a pump on a speedaire model # 1z944b. want to know what size motor i can use  making a compressor from pieces i have scavenged

__________________
Bill says...

According to the Grainger website, this model pump uses a 1 or ...

Speedaire Dryer 3Z529A - how to hook up  I recently aquired a Speedaire Dryer 3Z529A and would like to know exactly how to hook it up. It looks very simple, however the inlet and outlets for ...

I need the specs on a model 3z181 - compressor has a lot of oily water in the line to tank  I need the specs on a model 3z181 - compressor has a lot of oily water in the line to tank

_________________________
Bill says...

Try your local ...

Sppedaire - leaking seals - need parts please  I emailed Grainger back and forth for weeks. They tried to blow me off twice. All I need is a seal and gasket kit. Of coarse mine was made in 1974 so the ...

need oiler elbow and 1/4 inch copper return line to head  crank case one way oiler line that returns to head 5hp 80 gal three phase

_____________________
Bill says...

If Grainger can't help you, I would ...

specs for a Dayton 2Z 050B compressor head  How old?
CFM?
single or 2 stage?
How large a motor can be used?

________________________
Bill says...

All very good questions, Bill.

Do ...

SPEEDAIRE COMPRESSOR ~ regulator required  I need to see where I can order a regulator for my speedaire compressor?

Thank you,

Vicki Knies
Hydro Air Systems Inc

______________________
...

What does a speedaire model # 21785B, 7.5 hp 2 phase motor compressor weight?  where can I find the weight of this compressor ? I built a wall mounted platform for it and to get it inspected by the city building dept. they require ...

Speedaire Model: 3Z492 ~ belt replacement  I need to repalce two belts on the compressor. Where can I obtain the right size. Also, what is the deminsion of the belts?
Thank You

___________________
...

PUMP COMPRESSION ~ IT DOESN'T HAVE ANY OR VERY MUCH COMPRESSION  WHEN I SHUT OFF THE COMPRESSOR IT SEEMS THAT WHEN IT'S COMING TO A STOP IT DOESN'T HAVE ANY OR VERY MUCH COMPRESSION. IT SEEMS LIKE RUNS CONSTANTLY AND ...

new 2wgx7 speedaire excessive oil out of the crankcase breather  I have a new 2wgx7 speedaire pump and in place of the dip stick they supplied a crankcase breather. It spits a lot of oil out. Any idea's? No there is ...

the white wire has melted and the compressor will not run  the white wire inside the off & on switch has melted and now the compressure will not start

___________________
Bill says...

Brian, extending ...

cooling fan - Speedaore - anyone know, beside Grainger, where Burt can find one...?  need cooling fan for a Speedaire portable compressor model#3Z972B 1 the compressor is electric.fan is attached to shaft which is attached to compressor....

speed aire compressor 3 hp 3 stage - how much cfm  speed aire compressor 3 hp 3 stage model 3z581 how much cfm

______________________
Bill says...

Can't be sure as I don't have the specs. Check ...

RE: model 5Z404C - Where do I add oil?  I have a speedair model 5Z404C - the serial number is 960701002. I can see a guage that shows the oil is low, but I cannot find where to put oil in.

______________
...

wiring diagrams for model 3Z492  need diagram for model 3Z492

compressor blows breaker when it starts after it is pumped up  I have a speedaire double pumper mod 5Z639A
it comes on at start builds pressure then the next time it calls for the pump to come back on it blows breaker
...

Need new pump for model 3JR77A, # 4KP89  Is this pump or a replacement available?

_________________________
Bill says...

The first step is to check with Grainger. They will advise.

Second ...

Ned a manual and/or specifications for a model 2Z626  I have the above speedair model aircompressor.
i need informations for technical details.
volt power watt cpacity and air presure and liters per min
...

won't pump up higher than 150psi and it should go to 175psi  i have a 4Lw38 and it blows off at 150 psi how can i fix it

__________________
Bill says...

Hi Bruce. Could you be a bit more specific about what ...

need manual for Speedaire air compressor model # 2Z626  I need a manual for the Speedaire Air Compressor model #2Z626. Recieved older compressor and missing hoses and water vaulve( or whatever you call it). And ...

speedaire parts numbers cross references  hi
i have an old speedaire compressor (grainger no. 3z424d) with a speedaire pump (grainger no. 2z499b)

i am repairing the pump and i need the gasket ...

Air Pressure  What is the top air pressure you can set a model 3z428c speedaire compressor at. Can it be set for 175 psi?

________________
Bill says...

Jim,...

Tank won't repressurize.  When I start the compressor completely empty of air it pumps right up. After depleting some of the air and when the compressor needs to repressuize ...

What Oil for a Speedaire 3Z180  What oil goes in the Speedaire 3Z180 air compressor

_______________________
Bill says...

Hi Craig. If you can't check the manual, and you can'...

speedaire model 1Z286E ~ what is air capacity  I would like to know the capacity of this compressor. It has a !/2 hp motor but not indication of its scfm

Thanks
Kevin

_______________________
...

Speedaire Air Dryer 3Z531B  Hello,

I have an Speedaire Air Dryer, air is leaking out of the drain. Need replacement parts. Do you have any thoughts of where these parts might be ...

speedaire 3z530a ~ leaking?  For Some reason it is air out from air drain outlet it is confused me need to find out why is it
still letting air out

_________________________
Bill ...

I need part for a speedaire air compressor model 3z355h  I need bearings and a seal for the compressor and bearing for the electric motor for model 3z355h. I can't find any information on this compressor.

1 hp speedaire - how much PSI  i'm getting ready to go to a auction to buy a 1 hp speedaire , i will be using it to work on my 18 wheeler and pickup , but i have not looked at it yet ...

Anyone have a manual for a speedaire modle# 3z395c1, stage ccw  modle# 3z395c1, stage ccw

COMPRESSOR SETTING AND AND CUTOFF   NEED WIRING INFORMATION--PRESSOR SETTING & CUTOFF PRESSURES. SAFETY INFORMATION FOR RUN COMPRESSOR.
MODEL 3Z423C SPEEDAIRE 1HP 1PHASE 110VOLTS

______________________
...

Takes A long Tpme To Build Up Air  It's A Fork Shaped Piece On Top Of The Head Broke It's On A 3Z181 Can U Help

___________________
Bill says...

I think you are talking about the ...

Need repl. comp.  Is there a replacement comp. for a speedaire mod 2z653d ? thanks Dennis

______________________
Bill says...

Hi Dennis. There may be, if I knew ...

speedaire compressor   iv got a new speedaire 20 gal model the handle broke looking to see how to order a new one if it isnt stil under warrenty

___________________
Bill ...

Bad Pulley on Speedaire - need replacement  I have a speedaire compressor model #5Z185, the pulley is marked PU98, K199C. I need a source for a new pulley

_________________________
Bill says....

speedaire keeps blowing fuse  I have a 2HP Speedaire compressor that keeps blowing the fuse when the compressor trying to restart. The specss on the motor are 115V/230V, FLA:22/11....

Speedaire pressure issues - need help  I have a sppedaire model number 2z653 1 stage that is a dinosaur and has pressure issues and I can;t find this model anywhere the man. serial # is 02097 ...

What is value of Speedaire Air Compressor Model 3Z323C  I have a used Speedaire compressor model 3Z32C. I can't find it listed anywhere. Would you know about how much it is worth? It is in good condition....

Removal of centrifugal unloader assembly from a 3z492?   Is the centrifugal unloader assembly screwed into the crank shaft or pressed ?

How old is a model#5f227a speedaire compressor  how old is model # 5f227 , is this unit a 3-phase

_______________________
Bill says...

Hello Bob:

I've posted it in the hope that someone ...

looking for specs on a 3z868  I just got a 3Z868 and was wondering what the CFM rating is. Also who makes the compressor. The compressor has the numbers 1398 on the side. It looks to ...

Running the compressor sounds different than before, like engine knocking  Is there somthing I can do to service the engine block to stop it from knocking when it's running, even though it still produces compressed air and shuts ...

SOLO SPEED SHOP  Wow!
I have had my compressor for over 30 yrs & never drained the tank have never checked the oil & a little plastic washed cracked in the regulator valve ...

Speedaire model 4GB42 portable air compressor - stalls on overheat  Runs great for about an hour,then stalls and will not keep running until it cools down. it doesn't appear to be over heating? Once it cools,it will run ...

I need to know what component or components I need to purchase to make an Speedaire model # 1WD40 25 HP compressor  My customer wants us to install what they call a cold start valve and I have looked into this and cannot determine what they are talking about.

Their ...

Manual for beautiful older Dayton / Speediare...?  Need a handbook so that I can service this old thing...or any suggestions of what to do and what parts to replace.

Many thanks



Bill says....

Speedaire Model 5Z404-2 air compressor - external shut off  I have one of these installed at a Bakersfield high school where it will be used for shop air. The H.S. District wants to shut the unit off on the weekends....

1982 Speedaire 2Z498 stationary air compressor Won't build pressure  I have a 1982 Speedaire 2Z498 stationary air compressor. I noticed on the very top of the head there is an open hole about 1/2 dia when I put my finger ...

My Dayton Speedaire compressor seized.   A technician diagnosed the need to replace the motor. I did that and the compressor worked fine and was quiet for a month. Now it bangs away like a bearing ...

Value of an speedaire air compressor  I have a speedaire air compressor that is model # 5z185b 1. I acquired it in a buy/sell transaction and have no idea what something like this is worth....

How do you set up the connector for the coil & do you have a visual picture?  I have a speedaire model: WW296-7, WWHRV10-12-3,STR1,WD22



Bill says...

I'm not an electrician and though I do my own work, I can't advise ...

speedaire compressor model 1wd61 and need to know what kind of oil  We have a model 1wd61 and need to what kind of oil to put in compressor and capacity.



Bill says...

Hello Jack, nice to hear from you.

I ...

speedaire 10 hp two stage compressor - Adjusting air pressure  i have a horizontal speedaire 10 hp two stage compressor 2007 serial # 1451673.how do i adjust the air pressure?



Bill says...

The cut in ...

Pressure switch gone on Speedaire compressor.  I have a old speedaire compressor, it needs the auto shut off, it stopped shutting off, the pop off went off, I stopped using it do you know if I can get ...

Speed aire air compressor   3-phase 208/230/460volt max is 230v 50amp.min is 230v 19 amps it is an 80 gallon air compressor. i have to wire the motor and the power there is low voltage ...

Speedaire model 5z185b   Is it ok to transport this compressor lying down?



Bill says...

Hello Gerry.

I can't tell you for sure as I am not familiar with that ...

speedaire PRV Valve opening  I have a 25 HP speedaire compressor that when it comes on the PRV valve on the head of the center cylinder automatically opens and stays open until the ...

GETTING A NEW COMPRESSOR HEAD  I HAVE A MODEL 5Z185A SPEEDAIRE COMPRESSOR. THE COMPRESSOR HEAD HAS GOTTEN TO THE POINT WHERE I CAN'T EVEN BE IN THE SHOP WHILE IT RUNS. EXTREMELY LOAD!...

How can I get a copy of the ASME CODE certificate on Speedaire air tanks  We purchased some Speedaire 13 gallon air tanks from Grainger for our units that shipped to South America. The customer wants a copy of the certificate ...

Speedaire compressor Blows Breaker  I have a Speedaire by Dayton Model 13788 2H.P. Do you have a service rep in the Cincinnati, Ohio area.



Bill says...

Hi Bette Dean, and ...

Speedaire AIR COMPRESSOR pops breaker on start up  I HAVE A SPEEDAIRE 20GAL. AIR COMPRESSOR WHICH I JUST GOT FROM A FREIND. EVERY TIME I PLIUG IT INTO THE OUTLET IT WILL START TO RUN THEN POP THE BREAKER ...

There is an air blockage  I have a Speedaire by Dayton Air dryer model # 4xx33
There seems to be a blockage of some sort... It is not allowing any air flow.

Do you know what ...

Speedaire model 5F237A (or motor model)  When I turn on my compressor it begins to smoke. Does it need oil? I have never put any in it since it was an electric motor.



Bill says tell ...

Speedaire 80 gallon model 1Z218 won't build pressure and blowing oil  The compressor gets to 40 psi and air starts blowing out through an opening in the front of the compressor.



Bill answers...

Hello Glenn,...

Older Speedaire / Dayton compressor - what size motor?  it has a tag on it but no information on the tag, it is a 3 cylinder compressor. what i need to know is how big of a motor i need. the tank is a 6o gallon....

How do I wire a Speedaire compressor from 115 vac to 220 vac?  The Speedaire air compressor is a Model 3Z395, with a Century 1 1/2 motor 120/220 vac. Model S-141459-20
There is no wiring diagram on the motor to show ...

I need only to buy the compressor part C179G (Speedaire)  I have a Speedaire air compressor mod. 5Z185. I need only to buy the compressor C179G. do you know where I can buy one. Can it be purchase from you. if ...

Unhappy with Speedaire Purchase  I was very disappointed with my recent purchase of a 1NNF6 (portable 20 gal 120V) compressor when I saw that it is made in China. I ordered the same unit ...

There is water build up in the Speedaire oil block..  I have a speedaire 5Z640A compressor and I keep getting water mixed in the oil in the oil block in the pump. I keep changing the oil and after a couple ...

What oil to use in my Speedaire Compressor?  I have a speedair model 5Z185B air compressor(model #on the pump itself is 2Z499C. I need to know what type of oil to use for an oil change.



Bill ...

How to change the oil in my Speedaire compressor?  It's a 20 gallon speedaire model 3Z419J. I've lost the manual.



Bill answers...

Hi Meg:

Every brand of compressor is slightly different,...

Old speedaire model 1Z944b  I recently purchase an old speedaire model 1Z944b. On top of the cylinder heads there is a filter media that I need to replace. Can you tell what it is ...

Speedaire 5z185a compressor repair  I recently inherited a speedaire 5z185a compressor. its been hidden in a shed on a farm for awhile. my question is: is there a diagramatic drawing for ...

Speedaire Compressor Problem  Hello
I have a speedaire compressor, I don't know how old it is, but I can leave you the serial # 071091L 530384. The model # is 52644 1 it is a ...

Speedair Air Compressor Overheating  We have a Speedair Air Compressor --

Serial #
N.DeSerie
122095L-795897

Model#
5Z3988 2

It is overheating so we suspect that we need another/...

Speedaire compressor oil  I need to know what oil to use in a SPEEDARIE--- Model 3Z492? The unit is quite a few years old, bought in 1980,1981 or so. It's powered by a dayton electric ...

Speedaire on off switch doesnt work  The on switch is out need new one. It's a speedaire 3/4hp 125psi 3gal. 120volt 10 amp searl # 061792l 065907



Bill answers...

Howdy Randy:...

I need some info on a maintaing a speedaire compressor  My question is: Is there any info avaliable to me for doing preventative maintance on a Speedaire model # 5z185b?


Please click on the Speedaire button ...

changing the oil in the Speedaire motor  We have a Speedaire 10HP compressor used 5 days a week. How often should the oil be changed and what type of oil would be the best?

thanks,

Mike ...

Value of compressor, approx age and type oil -Dayton motor # 9K323J / Speedaire compressor #2Z499A  Would appreciate knowing value,approx age and type of
Dayton motor # 9K323J / Speedaire compressor #2Z499A.

Also,what kind of oil is used in a compressor ...

Speedaire Model 3Z323B. Recommended cut-out pressure?  I have a Speedaire Model 3Z323B. What is the rated maximum pressure the tank will safely hold?

What pressure should the compressor shut off?

Is ...

What lubricant for Speedaire compressor?  WHAT IS THE RECOMMENDED LUBRICANT FOR A SPEEDAIRE ROTARY SCREW COMPRESSOR MODEL 1WF14.(TYPE WHETHER MINERAL OR SYNTHETIC AND ISO NUMBER PLEASE)




Hello ...

Filter regulator for a Speedaire stock # 47028a  I have a Speedaire stock # 47028a I know it's out of production.What can I do to change the filter, if possible. If not, what would be a compareabl;e replacement?...

speedaire model# 4b222e  unit draws high amps as the air pressure rises



Bill responds...

Hi Julio:

I'm not sure what your question is, but here is a reply to ...

Unloader /switch . Speedaire 1HP compressor  Mod# 3Z406h 1
Ser# 1207881-040551



Bill responds...

Hello Barry:

I take it that you are looking for a new pressure switch for your Speedaire ...

Another Speedaire question  I just purchased a used SpeedAire No. 4B247A. I have no Owner's Manual for it. 1) Is a manual available? and 2) What kind of lubricating oil does ...

What kind of oil should I use in my speedaire compressor?  What kind of oil should I use in my speedaire compressor. It is time to change and the manual says mobil with a bunch of letters and numbers. Thanks for ...

oil change for speedaire model 2Z499C  hello......i've been operating my comp. for at least 15 years now having trouble free service , but it seems to be sounding more & more sluggish as i use ...

what type of oil do i need for your speedaire compressor, model 4b236c  the compressor that i have has been sitting up for a few years, is there any precautions i should take before running



Bill answers...

Howdy ...

Speedaire Model 3Z323F  Looking for a replacement Pressure switch. Maybe Part # CW207551AV Thanks, Bill
bwilkerson@remax.net



Bill answers...

Howdy:

Actually,...

Speedaire compressor repair on Guam?  I wanted to buy repair parts for our Speedaire Air Compressors, Pump (1WD30). I cannot locate suppliers and contact person for our needs.



Bill ...

Losing air pressure in a Speedaire Compressor  What would cause you to lose air pressure the Compressor?



Hi Walt...thanks for the question.

Many things will cause you to lose pressure....

SPEEDAIRE AIR COMPRESSOR - how to regulate air pressure  how to regulate air pressure ON SPEEDAIRE AIR COMPRESSOR.

____________
Bill says...

Howdy:

If you are talking about the air pressure inside the ...

Speedaire model 5Z0168  What kind of oil should i run in this model,and how much?.It is a 5hp V-twin 2stage pump.Where can i get a owners manual?. jeffg7@verizon.net



Bill ...

I need an answer on a Speedaire rebuild  Rebuilt a speedair air compressor-put in new rings and new intake manifold -pressure was initialy set at 110 psi--after 25 minutes pressure dropped to ...

Need advice about an air leak out of a Speedaire's compressor tank.   (Recently widowed and haven't a clue.)

Have discovered a small hole in the tank and am wondering if it would be dangerous to continue to use it as ...

No pressure from my old 60gal speedaire Model 32180  (I) put together an old 60gal speedaire Model 32180 compressor and motor. Got everything together, pressure on gauge does not move, pull relief value no ...

Speedaire Compressor   Hi-

I am working on feasibility study project and would like to know the age of existing Speedaire compressor and approximately the average life span ...