speedaire 3z176b started knocking
by Jeff Paye
older speedaire compressor pump model 3z176b- started knocking.
On weekend I disassembled 2nd stage head and cylinder.
Rod broken at piston wrist-pin. Is there a snowball chance in xxxx that I could find one of those rods?
In meantime I need air for my repair garage.
Picked up used 60 gal 2 cyl Sanborn upright.
Compressor is direct plumbed into tank.
Seems like I should have a pressure bleed off and 1-way valve between tank and compressor,, yes? Maybe could use parts from Speedaire.
Typically there would be a check valve at the tank to keep air in when the unloader valve opens on pressure cut out. As to pressure bleed off, if you are speaking of the unloader valve, that my be integral to the pressure switch on this model. If you refer to a PRV, and if the compressor doesn't have one, you do want one on the tank side to ensure that the tank and the compressor are not over-pressurized.
3z323 compressor/ tank 20 gallon - need a new tank
by gary prososki
need a new 20 gallon tank on my speedaire 3z323 where can i find one ???Thanks Gary Prososki firstname.lastname@example.org any help well appreciated.
Reassemble a continuous run unloading valve off a Speedaire
by Moe's Reel Cleaning & Repair
(Cassopolis Mi. USA)
I have an old SpeedAir 2812 single cylender compressor from dayton elect.It has a F.C. Kingman valve i had to take apart to kleen, and now dummy me forgot how to put it back toget- her. Can you send me a schematic of the valve, i would be most thankful. Problem is there is no numbers on the valve.
I do not have access to the schematic. I have posted your request in the hope that a reader does have it, and will post a response.
need manual for Speedaire air compressor model # 2Z626
by Lonne Schreiner
(port Washington, WI)
I need a manual for the Speedaire Air Compressor model #2Z626. Recieved older compressor and missing hoses and water vaulve( or whatever you call it). And would like to clean it up and get the missing parts but can't seem to find it online. Does anyone know where to look???