Reattaching The Cam On The Elite 175 Motor Shaft

by Marc Tucker
(Tollesboro, Kentucky USA)

Hi Bill I have a Elite 175 X mini Compressor that I was using for my airbrushing and the motor still runs but the cam had came off and I'd try putting the cam back on the motor shaft and it keeps coming off so I had my wife to purchase some lock tight but it wasn't the liquid form this was some gel type.


I'd followed the direction on the package and let it set over night and I tried it today and it started working but then the cam came back off.

Is there any way of keeping it attached to the motor shaft if so can you let me know because at this moment of time I'm falling behind on my computer cases airbrushing and I have a total of 12 computers to airbrush designs on. Thank You in advance

Comments for Reattaching The Cam On The Elite 175 Motor Shaft

Click here to add your own comments

Sep 21, 2015
Cam
by: Doug in s.d.ca

I'm gonna assume this is a bolt of some sort holding the cam?

In your place, I'd get both red and blue Loctite®.

Try the blue first (only takes 10 min to set).

If that works, fine. Otherwise go red. That should hold it.

Otherwise, send pix of it.

Click here to add your own comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Air Brush Air Compressor Issues.