Photoelectric switch sensor & Solenoid valve

by Ram
(Wisconsin)

this is the relay

I bought averything I needed for my project (two sensors, a 24VDC relay, power supply amd of course , the Solenoid valve) but I got stuck in the wiring, I am using two omron E3F2-R2C4.

This Relay will keep the Voltage applied to the Solenoid valve when the object is detected.

Then the second sensor will trigger when the (Pneumatic Cylinder) is fully extracted and turn off the Relay and this will retract the Piston.

I got a 24DC power supply to power the solenoid and the sensors.

This is a single acting Open/Close solenoid valve. When voltage is applied, it will extract the Piston and when voltage is removed the piston will retract.

So this would be the simplest way to do it.

PS i have more pics but I am allow to browse just to use one.