No air out on Huskly HL410100 Compressor

by Daniel
(Middleburg, Fl)

Compressor starts and shuts off at set pressure, but nothing comes through and out the OUTLET and no reading on the gauge - 0.


The release valve - an O ring you pull - will release all air built up in tank.

I took off end pieces and pulled out little gold colored valve and o-ring and replaced with spring nut over the valve and put it back together, but nothing.

It's as if air is stuck before it gets to the outlet and gauge sitting above it.

Comments for No air out on Huskly HL410100 Compressor

Click here to add your own comments

Jan 24, 2015
No air out of Husky
by: Bill

Not an unusual problem based on the number of queries about it.

We published a page about "no air out of hose" in the troubleshooting section. Have a look at that page and do the checks.

Add a comment here if that doesn't help indicating what you checked and what you found.

Bill

Click here to add your own comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Husky Air Compressor Issues.