Kobalt Model 0200382 3 gallon 1.5 HP compressor

by Brian Britting
(Westbrook, ME, USA)

kobalt model 0200382

kobalt model 0200382

I have a KOBALT 3 gal air compressor model #0200382 (serial # 0057655) and the threads on the air regulator knob have broken away in some spots so the pressure can not be adjusted beyond 15#.


The part number from the owners manual is WCFATY.01.05

I doubt the compressor has more than 30 hours use.

None of the websites (mastertoolrepair; Sears or others) don't list the model. Any ideas? Thanks for any information.

BB

Comments for Kobalt Model 0200382 3 gallon 1.5 HP compressor

Click here to add your own comments

Oct 23, 2016
0300841 knob?
by: Doug in s.d.ca

You may have a chance. Your model is listed on parts sites, so you have a shot at finding what you need.

Good luck.

Oct 22, 2016
Add another one to the list
by: Anonymous

Also have a failed air pressure regulator knob. Mine probably doesn't have 2 hours of use.. I guess you get what you pay for. Model 0300841 here....

Apr 03, 2016
bit of a longshot...
by: Doug in s.d.ca

Does your manifold look anything like this?:

http://www.mastertoolrepair.com/manifold-regulator-knob-e104120-p-72196.html

Otherwise, as mentioned elsewhere, probably the best thing to do is roll your own plumbing with conventional parts. Might not look great, but it'll work if done right.

Apr 02, 2016
Regulator knob
by: Mark

I also have a failed regulator knob as the plastic threads have stripped on this model. The regulator is made into the manifold. No way to replace unless the entire manifold gets replaced. I just need a new knob. Will see if I can find my parts book

Jul 27, 2015
Regulator
by: Doug in s.d.ca

What Bill said.

But it looks like it may be unconventional. Did you try the number in the manual for parts?

Jul 27, 2015
Kobalt model 0200382 regulator
by: Bill

BB, I suspect if you pull the cover off you will find that almost any general purpose mini-compressed air regulator will suit.

Make sure you empty the tank with the power off before you disassemble the piping to remove the existing regulator.

Take that one with you to the store to find a comparably sized model.

Bill

Click here to add your own comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Kobalt Air Compressor Issues.