I need a pressure switch for one mech power twin tank compressor

need a pressure switch for one mech power twin tank
compressor.

____________________
Bill says...

It will be harder for folks to help you find your part as you haven't provided sufficient details about the model number and so on.

I've posted this on the parts wanted page, nonetheless.

You don't need exactly the same switch, as long as the new one has the same cut in / cut out pressure level (or close), can be mounted on your compressor, and interfaces properly with the unloader valve.

Take your switch off (mark all the wires in detail so you know where they go when you reinstall a new one) and take the switch to the compressor repair depot nearest you. See if they can help with a new one.

Good luck,

Bill