I am looking for a two cylinder compressor for a specific application

I am looking for a two cylinder compressor similar to the Champion A-Series where the pistons are out of phase, one at TDC the other is at BDC.


When I removed the heads on the Champion A-Series I found that both pistons reach TDC about the same time since they share the same lobe of the crank shaft.

I thought the crank could be switched out but there is not enough space between the cylinders to have two lobes on the crank.

The A-Series had a bore of 7.875" with a stroke of 4.5".

I need as much displacement as possible.

I am cycling gas back and forth through some piping to cycle an object in the pipe.

Do you know of any compressor that would have this configuration?

Comments for I am looking for a two cylinder compressor for a specific application

Click here to add your own comments

Mar 27, 2014
two cylinders
by: Doug in s.d.ca

would not a switch off a regular compressor be simpler?

What kind of pipe and object are you moving? How far?

Practical application, or demonstration?

Click here to add your own comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Sizing A Compressor.