How to remove fan pulley on 87 Ingersoll Rand

by craig
(pa)

I have an 87 Ingersoll Rand tow behind air compressor and the seal and o ring needs to be replaced on rear fan pulley shaft but don't know how to pull the pulley.


I also need to know somewhere that you can get parts.

Comments for How to remove fan pulley on 87 Ingersoll Rand

Click here to add your own comments

Mar 22, 2016
Pulley removal
by: Bill

Thanks for updating us, Craig.

Mar 22, 2016
Pulley removal
by: Craig

I figured out how to pull the pulley you need to remove the two set screws and use one to screw into open hole to push pulley off shaft. Then you have to very carefully insert screw driver into remaining part of pulley on shaft with out breaking it and slide it off.

Mar 19, 2016
pulley
by: Doug in s.d.ca

Depends on the pully. Is it stuck or what?

Parts are a bit of a crapshoot. Google usually turns up something, and there's your local I-R store.

Click here to add your own comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Ingersoll Rand P185 Tow Behind Air Compressor.