How to check 7MC-2A Oil level

by Albert J Radke
(Fairmont, NE. 68354)

Davey 7MC-2A To check the compressor oil level> make sure all the air pressure is out of the compressor.


Remove the big screw driver nut under the pressure gauge under the separator at the end of the compressor. This is were you check the oil level and add oil.

You fill the compressor until oil starts to run out of the hole. Replace the nut and run the compressor for a couple of minutes and shut it down. Bleed the air off, take the nut out and check again.

Click here to post comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Davey Air Compressor Issues.