Homemade compresser yank

by tom
(ontario canada)

Two horse motor from mastercraft and all the goodies from the compressor want to add the flotec tanks and put it all together need to get info on the settings the flotec tank is the same thickness as the 5 gallon of the mastercraft compressor any help with this and help for the switch settings would be great the pressure switch i have says ON 85 psi and off 115 psi want to bring up the 85 to 90 and the 115 down to 100 my email is nighthawk_178@hotmail.com please get in touch with your help thanks

_____________________
Bill says...

Tom, good to hear from you. Sorry, but I don't respond to requests for direct contact unless it's to design a circuit as a job. There are just too many comments and not enough time.

I'm not quite sure what you mean about the tank settings?

Adjusting the pressure switch is doable, check on the Pressure Switch page for details.

Cheers,

Bill