Holman 1997 model 51 runs good uses oil.

by Junkchev@zoomtown.com
(Cinch)

Starts and runs good with one hammer but oil coming out of air discharge. Compressor shuts down when coming up to temp. Need to pull air temp switch wire when it acts up, but believe air temp is the cause for shut down. Pulled orriface off at air tank was not obstructed. Anything else that could cause oil consumption issue. Help is greatly appreciated!


Will always start back up after cool down period 10-15 min

Have already replaced seperator filter.

Comments for Holman 1997 model 51 runs good uses oil.

Click here to add your own comments

Aug 29, 2016
Oil
by: Doug in s.d.ca

Noticed any unusual heat at the bearings?

I'm thinking bad bearings -> runs hot -> reduced oil viscosity -> too much to separator -> oil in output air.

Have you changed the oil?

(Cinch, outside Sydney?)

Click here to add your own comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Tow Behind Compressor Issues.