Help wiring a CAP 2000 Pressure switch
CAP 2000 Pressure switch
I have a CAP 2000 air compressor that i replaced the switch in because the unit would not turn on. The switch is AB-9415626. Now my issue is that now the unit will not turn off and the pressure relief valve opens. There was some time between when I took the old switch out and replaced the new one so I cannot remember exactly how it was connected. Looking at other switches online, the terminals are marked motor and line and you hook up accordingly. My switch terminals are labeled L and N. When I connected it the new switch, I had the power cord connected to the L and N terminals and the motor connected the the other L and N terminals. It runs this way but will not shut off. I tried connecting the power cord to both L terminals and the motor to the N terminals and got nothing. Is this new switch i got bad? Do you know the proper way to connect this switch? I figured L is line and N is motor, but not sure anymore. Any other suggestions wold be appreciated.