Guidance for wiring pressure switch

by michael ramphal
(florida)

for husky m#h27508uwk year manf 2004





Bill says...

Hey Michael. Many pressure switches have the schematic for that switch stencilled under the lid. I take it yours doesn't?

Can anyone help Michael out with guidance on how to wire his pressure switch?

Thanks,

Bill

Comments for
Guidance for wiring pressure switch

Click here to add your own comments

Oct 13, 2010
 pressure switch wiring instructions
by: SGT KILLDIE

first of all i'm quite sure there are SOME kind of schematics on a sticker or molded into the plastic, but if not, do this....pull the cover off of the switch(if i have to tell you to unplug it first, then you've got more problems than i can solve) The switch will most likely have 2 bars which move up and down when you hit the on/off switch. Locate these and wire the white from the wall to the moving contact and the white from the motor to the fixed contact. do the same on the other side w/the green wires. and obviously the black will be your ground which is most likely going to be mounted to a nearby screw, which should have a small symbol on or near it that looks like one of those 70's era tv roof antennas. I'm not an expert, but this is pretty basic stuff...Hope this helps.

________________________

In all cases, if you are not a licensed electrician, know that you risk your life playing with electricity. If you aren't sure, don't do it.

It sounds like SGT KILLDIE has his stuff together, but all advice is suspect until it's proven. Be careful.

Bill

Click here to add your own comments

Join in and write your own page! It's easy to do. How?
Simply click here to return to Has pressure switch issue