GENERAL ELECTRIC MODLE 4A5W1 (G365953)

by CHRIS CAMPBELL
(NEDERLAND TEXAS)

MODLE 4A5W1 (G365953) WHAT R P M SHOULD THE COMPRESSER RUN AT AND SHOULD THERE BE A CHECK VALVE IN LINE AFTER THE COMPRESSER BEFORE THE TANK . THANKS CHRIS

______________________
Bill says...

Chris, the motor plat should tell you the RPM of the motor, and the sheave sizes will tell you if it's a direct one to one, or if there is pump speed increase or decrease from the drive.

Yes, there should be a check valve in the line from the pump to the tank. It is common for that check valve to be part of the fitting that goes into the tank.

Cheers,

Bill