Gas compressor 2 stage V Compressor w/20hp Honda Gas

by Patrick
(Edmonton, AB)

Gas powered air compressor

Gas powered air compressor

2 cylinder compressor pump


6 socket head bolts hold down each head

Right head has larger piston (head diameter 8.5" Inlet at front of head and goes to cooler at back right

centre acorn nut on top

relief valve at back right on top
left side of head has a fitting which has a line going down to the crank drive at the back (oil?)

"12N1 2" Stamped on top of head on left side
Bolted to compressor body with 4 bolts

Left head 6.5" dia has Cooler inlet back centre, to tank back right, relief valve on top of head by outlet to tank

Bolted to compressor with 4 bolts

Cylinder fins are round, not squared off like some manufacturers

6 bolts hold down front cover, there is an outlet in the centre

Cooler wraps around drive once between pulley and compressor, no fins

This is currently on a 30-40 gallon horisontal tank with a GX620 Engine
2 belts drive the pulleys. Tank is red, looks like the original logo had blue and yellow

No model number, Serial number is - RMA18GT06061H055

Thank You
Patrick

Click here to post comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Identifying An Older Air Compressor.