Eagle YL90L2 - Air compressor pressure

Gday,
I have an Eagle YL90L2 3.0Hp 50Lt compressor and want to know if I can adjust anything to keep the output at a certain pressure. Example: My compressor charges up to around 110psi and then after discharge kicks in at around 80psi. Can i change it to kick in around 90psi?

Many thanks

shaneem@internode.on.net

____________________
Bill says...

It is the compressor pressure switch that tells the compressor when to start and stop, based on it "sensing" the pressure in the system.

It is the engineers that designed your air compressor that determined the optimal cut in and cut out levels for best use, longer time between components failures and so on.

If you adjust the pressure settings via the nut on a thread inside the pressure switch, you do so at your own risk.

Cheers,

Bill