Confirm the cut in and cut out pressure

by Jim
(Ohio)

I have a new Quincy QT 54 compressor cut in pressure is 105 psi and cut out pressure is 135 psi I would like to know if this is a good running pressure for this compressor

Comments for Confirm the cut in and cut out pressure

Click here to add your own comments

Aug 17, 2017
QT-54 pressure settings
by: Doug in s.d.ca.

It's good for the compressor, yes.

If you don't need more air than what you get as-is, leave it.

If you find you run out, you can set it up to 175, per the manual.

You can even set it lower, to save electricity costs, if you find you have more than enough at the current setting.

I believe there's a fixed 30PSI gap on the cut in/cut-out, so you may be limited in how low you can go.

Click here to add your own comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Quincy Compressor Issues.