CT250 compair not starting

by hameed bangash
(Wah Pakistan)


I have CT250 compair portable compressor (powered by Cummins QSB6.7) which is down for 3 month due to not cranking.


Actually engine is ECU controlled and engine ECU is commanded by Compair control panel
(Can buss type electronic control panel make EHB ELECTRONICS?)

The problem is that engine is not starting, the display is showing fault (I/O).

i have manually cranked the engine from starting solenoid engine cranks but not starts.

I arranged Cummins INSITE software but software doesn't shows any engine related problem.

I have checked all the air system and engine related sensors connectors and wiring found no problem and also replaced EHB panel but problem is still there.

Compressor running hours are 2500.

I also don’t have any connection diagram or any electronic service manual as not supplied
With compressor and the local dealer visited for 3 times but they could not understand the problem.

I will be very much thankful if somebody can help me to troubleshoot it or can help me regarding providing electronic service manuals copy or connection diagram.

Thnks.
Hameed Bangash
rpttc@yhoo.com
+92-300-5280091

Comments for CT250 compair not starting

Click here to add your own comments

Oct 01, 2012
Cummins QSB Quick Ref Guide
by: Carls421

Hi, I have the Cummins QSB 6.7Quick Reference Guide which gives you the menu structure for the control panel if thats any help?

Reply to this message with your email address if it is of any help

Kind Regards

Carl
___________________
Thanks Carl. If you wish to send it to me, please do, and I'll upload it for others too.

Bill

Click here to add your own comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Compair Compressor Issues.

compair 250cfm with deutz overheating and cutting out

by ross
(qld)

250cfm with deutz overheating and cutting out within 5 minutes

Click here to post comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Compair Compressor Issues.

where can I get info on an old Luchsrd N1 compressor oil spares etc

by Mike Kendrick
(Wales Barry )

General info please

semkay@toucansurf.com

Click here to post comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Compair Compressor Issues.

holman compair - need the rotor clearance

by john rutledge
(Surrey england)

Zitair250/260 Perkins 4/248 ( compair /holman

I need the rotor clearance for the endplate and the tourque setting for the rotor bearing retaining nut there is a book from holman DTP 404 any one got one ????

Thanks
John from England
______________
John, I've moved this to the Compair page. On that page is info about getting in touch with Compair. Since this is their brand, I hope that they will be able to help.

Failing that, we've a lot of knowledgeable people out there, and I hope one posts the info you need for you.

Cheers,

Bill

Comments for holman compair - need the rotor clearance

Click here to add your own comments

Oct 01, 2012
Manual
by: Carls421

Hi John I have the manual for your compressor here, if you could post your email address as a reply to this then I can send it to you

Kind Regards

Carl
_________________
Carl has also, kindly, sent me a copy of the manual, and I have uploaded it to the Compair page for all to download as required.

Thank you, Carl.

Bill

Click here to add your own comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Compair Compressor Issues.