compair 6100 running fine then continuously stops and shows stop busy on sure scan

by Robert Binnion
(Anderson IN)

compair 6100 running fine then continuously stops and shows stop busy on sure scan

Comments for compair 6100 running fine then continuously stops and shows stop busy on sure scan

Click here to add your own comments

Dec 11, 2015
sure scan
by: Brandon

The sure scan records any faults in an error history menu, you can read this using the arrow keys and enter, when its on the error message press plus key it will give you more information about the fault.

it could also be a defective key pad or a remote stop button (if you have fitted this option )

with the machine stopped access the sure scan menus -Service Diagnostic- scroll down and test keypad. press enter and you can check all the keys
pressing the RESET key will exit this test.

if you have added a remote stop button please check this too

some installations add remote stop start as a single circuit using one switch or a time clock/programmer, you can disable the remote from the -commissioning Config - menu .

choose remote control to get menu and you can disable this to here.

to access these menu's you will need to enter the user code Spanner/Clock /Spanner/Clock.
when asked.

you cannot disable the facia keys.

depending on the age of the sure scan there are 3 LED or lamps on the unit Right hand side the top one is power on , the middle is Auto Restart enabled, than the lower one is remote control active.

Click here to add your own comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Compair Compressor Issues.