Central Pneumatic model 95386 won't start

last use I had to drain the tank to get it to work. It worked for one use. Now it does not start. I have drained the tank again, but the motor won't start even after I press reset button. normally the reset button works.

______________________
Bill says...

What is happening when you plug in or turn on your compressor? Any noise, pressure switch trips... anything?

If nothing is happening, at all...

-are you sure you are getting power?
-if you have an on/off button, is it set to on?
-do you have a re-set button on your motor? If so, push it.
-is the pressure in the tank below the cut-in pressure of your pressure switch?

If all is correct, take it in to a shop.

Cheers,

Bill