4B227C won't shut off.

by Howie
(Bristish Columbia, Canada)

I Have a Speedaire 4B227C compressor. The cutout switch doesn't seem to be operating properly. Pressure runs up to 140 psi. I switch it off manually at this point.


Is there a way to adjust cut out pressure to 135 psi as per spec sheet?

Comments for 4B227C won't shut off.

Click here to add your own comments

Jun 07, 2016
shut off
by: Doug in s.d.ca

Depends.

Look at this: http://www.about-air-compressors.com/pressure-switch.html

The pressure switch on yours may be fixed, and need to be replaced.

On the other hand, many are adjustable.

Usually, there's a recessed screw on one side of the switch holding the cover down.

Underneath, there may be one or two screws, and generally a tag telling what the screws are supposed to do.

If you choose, try adjusting one or the other screws - a quarter turn is usually enough to get some change. You'll need to experiment to get it right, be patient.

Also, be careful, you have dangerous voltage exposed.

Click here to add your own comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Speedaire.