Part For Task Force 10 gallon air tank

I need a part for this tank.


It's the brass piece that attaches and connects the PSI gauge and drain valve. I damaged the threaded piece that connects the hose.

There isn't much depth left on these threads but can it be unscrewed?

Can I get a replacement for this entire assembly somewhere? Any help is sincerely appreciated.

Larry

Comments for Part For Task Force 10 gallon air tank

Click here to add your own comments

Feb 22, 2012
brass problem
by: Anonymous

I have the same problem brass in valve broke out where hose fitting screws in bob

Nov 30, 2010
fill valve for task force air tank
by: Greg

You can find the brass valve assembly at Grainger item# 6X272
Tank Manifold, Maximum Flow 20 CFM, Type Carry, Tank Mount 1/2 Inch MNPT, With 150 PSIGrainger Item # 6X272
Price (ea.) $10.81
Brand CDI CONTROL DEVICES
Mfr. Model # CTM-100-150
Ship Qty. 1
Sell Qty. (Will-Call) 1
Ship Weight (lbs.) 0.3
Usually Ships** Today
Catalog Page No. 3422
Country of Origin
(Country of Origin is subject to change.) USA

________________
Thank you, Greg.
Bill

Aug 04, 2009
Same problem
by: Matt

I have the same problem...took my tank to Lowes the dealer I purchased the tank from...They were no help...What now?

________________

It sure sounds like the Task Force model has a problem.

Any way anyone could take a photo of the part and send it to me?

Bill

Feb 16, 2009
Need Brass Valve Part Also!!!!!
by: Ken L

I also need the brass part for this air tank. Where in the great world of ours can a person get a new one???????






Bill answers...

Hello Ken & Larry:

Further to your inquiries, here's my advice.

If you know the store that sold the Task Force compressor, go there and ask.

If you don't, go to any big-box compressor stores and ask them where they send their compressor warranty work. They will likely have a local vendor that works on all their compressors. Visit that local vendor, with your compressor, and show them the problem. With any luck, they will be able to help.

Good luck.

Bill

Click here to add your own comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Task Force Compressor Issues.

Task Force VLT0881503 air compressor continuously needs resetting

by Karen
(Ohio)

Have to hit reset button to start compressor. Will run to about 35-40lbs. pressure and then the reset kicks out again

_____________________
Bill says...

Sounds like it's going off on thermal overload.

May be a motor issue, may be mechanically caused and the pump has a problem that's overloading the motor.

Not enough info to diagnose further.

Cheers,

Bill

Click here to post comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Task Force Compressor Issues.