ga75 shuts down with a motor overload fault?
by bill p.
(detroit michigan usa)
atlas copco ga75 shuts down with a motor overload fault
about twice a day compressor shuts down with a motor overload fault I can reset and start again but something is going on. I have tightened every wire on every component available changed all filters changed oil and checked motor wires and nothing seems to help.
Many things come to mind. Anything else pulling power from the same circuit when the compressor is running when it goes into overload?
Oil in good shape and topped up?
Is it at the same time every day, or the time varies?
Air end wear....? Anyone else have one of these puppies that can help Bill P. out?
GA 75 atlas copco dryer compressor won't run?
by Gairy Rupnarine
My GA 75 Altas Copco start`s and run but the dryer does not start,when i press the reset switch the dryer compressor start`s and the fan attemp`s to start but it does not start,a few seconds later the dryer compressor stops.How can i rectify this problem?
Gairy, sorry, but I don't have enough information on your dryer to even guess.
I know some dryers have blowers. I'm not familiar with one with an air compressor.
I hope that others with an Atlas Copco GA75 compressor will offer suggestions.
Tow behind Atlas Copco CS34 Cylinder head complete
by Quartey Kofi
I need a cylinder head complete with gaskets for tow behind Atlas Copco CS34 air compressor and the injector pump for Ingersoll Rand air compressor 7/31, can anyone please advice where exactly these items can be purchased.?
contact me on 00233244610861 or firstname.lastname@example.org
Click here to post comments
Add your own question or comment. It's easy to do. How? Simply click here to return to Atlas Copco Compressor Issues.
Atlas Copco GA110+, Atlas copco
Atlas Copco GA110 Air compressor
I wwant manual on all types of Atlas Copco comprrssors
OGUNTUASHE BAMiDELE OLUWOLE
LAFARGE WAPCO NIG PLC
PMB 21011 IKEJA
EWEKORO 1 PLANT