Atlas Copco Portable Air Filter Problem?

I HAVE AN ATLAS COPCO XAS 136 .


I HAVE RECENTLY CHANGED THE OIL SEPERATOR BUT OIL IS STILL COMING OUT FROM THE OUT LET

WHAT MIGHT BE THE PROBLEM IS IT POSSIBLE THE OIL SEPERATOR IS DAMAGED AGAIN WITHOUT RUNNING 20 HOUR
_____________
Howdy, and thanks for your question. Since you didn't indicate your name or where you are writing in from, it's a bit difficult to give you specific information about where to go for help.

I cannot diagnose the problem from the information you provided.

What I suggest you do is visit here: www.atlascopco.us/usus , which is the Atlas Copco US Home Page and follow the links to their portable compressor page.

If the information you seek is not there, use the contact button to ask them the answer, or for the local repair shop for Atlas Copco.

I note that they apparently offer a three year warranty. If your unit is still under warranty, then they will be sure to help.

Cheers,

Bill

Click here to read or post comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Atlas Copco Compressor Issues.

QA45 water in filter?

by samson
(Nigeria)

hi,
i have an atlas copco compressor QA45 model. my problem is that i always find water in one of the two filters that isnt suppose to retain water and this causes the compressor to go off. any ideas please?
_________________
Hi Samson... I don't know enough enough about the filter you are referring to so I can be certain, but it seems to me if there is a water filter, then the bowl must have a method of draining that water. Can you comment on this, please?

Bill

Click here to post comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Atlas Copco Compressor Issues.

atlas copco comp GX18 - air blowing out of inlet

by john
(sudan)

hi i have a problem in atlas copco comp GX18 with Air blowing out of inlet
_____________
John, the air is blowing out through the intake filter? Assuming this compressor has one, that sounds like the inlet valve has failed.

Cheers,

Bill

Click here to read or post comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Atlas Copco Compressor Issues.

xas 36 - how do i install the blowdown valve?

by josie burke
(galway ireland)

atlas copco xas 36 - how do i instal the blowdown valve?

Click here to post comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Atlas Copco Compressor Issues.

Replacing silencer on compressor dryer?

by Andy
(Bojonegoro-Indonesia)

hello all,

Replacing silencer on Atlas Copco screw type compressor dryer?

As we know that dryer unit on air compressor is always on line. There is step mentioned on the plan maintenance regarding to manufacturer manual that silencer should be replaced after certain running hours of equipment achieved. At this occasion, what is the recommeded step action to safely carry out the replacement of dryer silencers ? many thanks for the responses.

Regards,
Andy.

Click here to post comments

Add your own question or comment. It's easy to do. How? Simply click here to return to Atlas Copco Compressor Issues.